KTM 790 Duke Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter · #1 ·
hiya all, new here..
While waiting for my bike to arrive, I'm trying to gather info to see if I can adapt a set of Marchesini wheels, from an '07 GSXR. Hopefully, it's going to be something that I can make work. So far, I've determined that I can make them fit the KTM axle diameter. The rear is the same, and I found bearings that will make the front fit.

What I need next is the measurements for the distance between the front rotors, and the same for the rear rotor-to-sprocket distance.
 

·
Registered
Joined
·
33 Posts
Hi mjg15,

I get 133 mm from outer edge of left front rotor to outer edge of right front rotor. Inner edge to inner edge is 123mm.

For rear, I get 200mm from inner edge of rotor to inner edge of sprocket.
 

·
Registered
Joined
·
63 Posts
Discussion Starter · #3 ·
Thanks, really appreciate it! Looks like the front is a few mm narrower, and the rear is about 12mm wider.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top