KTM 790 Duke Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
What should the clearance between the top of the triple clamp and the top of the fork leg be? I have a svc manual that says it should be 25mm. But its way lower on my bike and on most youtube walk around videos... Thoughts?

5525
 

Attachments

·
Registered
Joined
·
412 Posts
Isn't that a service diagram showing how to clamp a fork leg in a clamping stand (a static tool) so you can tighten the bolt after servicing?
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Isn't that a service diagram showing how to clamp a fork leg in a clamping stand (a static tool) so you can tighten the bolt after servicing?
you are right. I missed the "in the area of" the upper triple clamp... as "in" the triple clamp. Thanks for the help!
 

·
Registered
Joined
·
41 Posts
Reviving an old thread, is the 3rd ring as on the above picture the standard position? I have just fitted ktech cartridges and can't find the standard position in the manual anywhere.

Thanks in advance...
 
1 - 4 of 4 Posts
Top