KTM 790 Duke Forum banner
1 - 11 of 11 Posts

Registered
Joined
497 Posts
Discussion Starter · #1 ·
Little bit of bling. Least this way I can see if the countershaft seal starts leaking quite easily lol


5840
 

VIP member
Joined
551 Posts
Or this in black.
 

Registered
Joined
164 Posts
Or this in black.

That's a little excessive.. And expensive.. Vanasche makes really nice parts.
 

Registered
Joined
497 Posts
Discussion Starter · #5 ·
Or this in black.
Not to my liking but I wish Yoshi would make one like I had on my S1000R!!

5845
 

Registered
Joined
2,023 Posts
It's not cheap but they had 15% for black Friday. There are some copies on Ebay already
It's very nice (y)... when there isnt grease on the chain. but if your bike is used everyday the chain will never be clean.
The advantage is that you no longer need to buy wax for the boots :LOL:
Almost tempted to get one and add a muck cover. This would be simple enough. Some thin C/F or G/F sheet. Local place does 1/5th mm stiff sheet.
This is also one of those times where I would be more than just "tempted" to get the original. As it comes with sensor cover too. And it's not ORANGE.
 

Registered
Joined
2,023 Posts
Decided to get a "Nice-CNC" CHINESE copy. Just ordered in Black. BIG price difference. And will attract less import duties.
I will adapt it so there is also a bit of muck protection.
PARANOIA PURCHASE? - almost certainly.
Looking at the sensor cover - piece of cake to make.
 

Registered
Joined
2,023 Posts
Decided to get a "Nice-CNC" CHINESE copy. Just ordered in Black. BIG price difference. And will attract less import duties.
I will adapt it so there is also a bit of muck protection.
PARANOIA PURCHASE? - almost certainly.
Looking at the sensor cover - piece of cake to make.
Arrived today. Now have to think about the muck protection bit.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top