Joined
·
843 Posts
Just seen this - it's coming out soon.
https://www.spark.it/en/exhaust/ktm/duke-790-18-19/gkt0110
Titanium.
https://www.spark.it/en/exhaust/ktm/duke-790-18-19/gkt0110
Titanium.
Spark twin Exit E approved.
1 - 8 of 8 Posts
Joined
·
151,134 Posts
Nice find!
Joined
·
15 Posts
hey sorry their website seems to **** itself off that link above...
did anyone end up getting one of these?
did anyone end up getting one of these?
Silenziatore GKT0110 per ktm DUKE 790 (18-20)
Scopri tutti i dettagli del silenziatore Spark codice GKT0110 per ktm DUKE 790 (18-20)
Joined
·
578 Posts
Very nice, but for looks, I guess. Mainly because it's way heavy due to the twin-can design. Weighs almost as much as the OEM. Will also be expensive.
Not trying to justify my own purchase decision, but the IXIL looks good (to me), reasonably priced and VERY light.
I also like the rear end shot...
Not trying to justify my own purchase decision, but the IXIL looks good (to me), reasonably priced and VERY light.
I also like the rear end shot...
Joined
·
15 Posts
DB rating follow the red arrows
Attachments
1 - 8 of 8 Posts
Join the discussion
Recommended Reading
-
$76 Ebay Akrapovic Knockoff Slip On Installed
790 Duke Exhaust And HeadersI ordered a cheap slip on for my 790 because I can't stand the look of the stock pipe and stole the SC Project to put on my 890. The bike will be for sale any day now, but for $76, I figured I would give it a shot. Honestly, it's a pretty decent pipe. Considerably lighter than stock, No...- 52
- 1K
-
Akra db Killer removal – rivet method
790 Duke Exhaust And HeadersI'm not sure if this makes me a big old hypocrite, but today, despite all my claims that I like a quiet bike, I removed the db killer in my Akra slip-on. Why? When I was at the KTM dealership on Thursday, I heard what this setup sounded like, and it tickled my fancy. Now, that I've done it, I'll...- 5
- 148
-
EvansB2 · updated
-
Akrapovic Evolution Full Ti Exhaust
790 Duke Exhaust And HeadersSo, I keep going back and forth between stock, WIngs slip-on, Arka slip-on or full, etc. I have not seen any good info that I can draw from to make an opinion on the Akra full system so I may be willing to champion the cause. I guess I don't mind spending the money one time if it is the right...- 0
- 80
-
AZMotorgod · updated
-
If you DeCat
790 Duke Exhaust And HeadersSectional photo of the Cat Converter. By removing this completely, and replacing with an available pipe: *What changes should be made to compensate for this as well as the slip-on? *Coober doesn't recommend removing the Cat, why? How will it affect the running with the Coober installed...- 13
- 5K
-
J D · updated
-
Copper paste for mounting the main silencer?
790 Duke Exhaust And HeadersI'm a stickler for following the service manual instructions, but I'm kind of scratching my head at this bit about using copper paste to mount the silencer clamp. Is the copper paste for the screw itself? I've never heard of it. Or is the paste for the clamp itself somehow? Any tips...- 3
- 84
-
colombo · updated
Join now to ask and comment!