Scorpion exhaust options

1 - 1 of 1 Posts

J D

A d m i n .

Joined Jan 1, 1970

151,133 Posts

Discussion Starter • #1 • 10 mo ago (Edited)

Nice looking kit!

https://www.scorpion-exhausts.com/ktm-duke-790-18-current-2018-2019-serket-slip-on-serket-taper-carbon-fibre

‘F’ effort for fotoshop.

1 - 1 of 1 Posts

Recommended Reading

$76 Ebay Akrapovic Knockoff Slip On Installed

790 Duke Exhaust And Headers

I ordered a cheap slip on for my 790 because I can't stand the look of the stock pipe and stole the SC Project to put on my 890. The bike will be for sale any day now, but for $76, I figured I would give it a shot. Honestly, it's a pretty decent pipe. Considerably lighter than stock, No...
- 45
- 1K
- B
  Blwnbyu · updated 11 h ago
Akrapovic Evolution Full Ti Exhaust

790 Duke Exhaust And Headers

So, I keep going back and forth between stock, WIngs slip-on, Arka slip-on or full, etc. I have not seen any good info that I can draw from to make an opinion on the Akra full system so I may be willing to champion the cause. I guess I don't mind spending the money one time if it is the right...
- 0
- 66
- AZMotorgod · updated 1 d ago
If you DeCat

790 Duke Exhaust And Headers

Sectional photo of the Cat Converter. By removing this completely, and replacing with an available pipe: *What changes should be made to compensate for this as well as the slip-on? *Coober doesn't recommend removing the Cat, why? How will it affect the running with the Coober installed...
- 13
- 5K
- J D · updated 4 d ago
Akra db Killer removal – rivet method

790 Duke Exhaust And Headers

I'm not sure if this makes me a big old hypocrite, but today, despite all my claims that I like a quiet bike, I removed the db killer in my Akra slip-on. Why? When I was at the KTM dealership on Thursday, I heard what this setup sounded like, and it tickled my fancy. Now, that I've done it, I'll...
- 4
- 107
- EvansB2 · updated 4 d ago
Copper paste for mounting the main silencer?

790 Duke Exhaust And Headers

I'm a stickler for following the service manual instructions, but I'm kind of scratching my head at this bit about using copper paste to mount the silencer clamp. Is the copper paste for the screw itself? I've never heard of it. Or is the paste for the clamp itself somehow? Any tips...
- 3
- 76
- colombo · updated 5 d ago