KTM 790 Duke Forum banner

R&G rad guard, handle bar risers

3374 Views 7 Replies 6 Participants Last post by  Carthorse
Hi all, Bought an r&g gaurd didn't fit, the top mount would not locate as some dukes have a plastic shroud and some don't, it's a mod to stop the brake line rubbing on the top of the radiator, r&g are aware and will send a new one out when in stock , can you tell me were I can get 20mm bar risers in the UK,
1 - 8 of 8 Posts
I just bought some recently for my 790 which I have not even had yet !(it arrives at the dealers tomorrow for collection by me Monday).
I bought swmotech bar risers from these, however I have not fitted them yet but do not anticipate any problems.

https://www.motorcycle-road-and-race.co.uk/bar-riser-for-28-mm-handlebar-h20-mm-black-
Rather than a Radiator guard i think the better solution is the front mudguard extension which stops all the dirt and stones flying up from the front wheel into the rad
  • Like
Reactions: 1
Welcome to the forum sir. Looks like you've already got some great suggestions here. Theres a whole thread dedicated to this topic already. https://www.790dukeforum.com/forum/586-790-duke-aftermarket-parts-accessories/124-bar-risers.html
Hi all, has anybody fitted an ASV Brake Lever, dropped my duke and snapped the lever , not very clever I know , a replacement is £80 cheers
Hi all, has anybody fitted an ASV Brake Lever, dropped my duke and snapped the lever , not very clever I know , a replacement is £80 cheers
Gee, that is very cheap for what is in effect a consumable.
Why do KTM charge so much for parts, just makes you want to fit other branded stuff.
BTW, on the subject of Rad guards, does anyone know how much a replacement rad costs?
Dash display condensation

Hi , after several ride outs the dash display gets unclear and appears to be condensation, ktm tell me that going from cool to hot conditions it will happen and there is breather for the dash ? Has any one else experienced this ? Cheers
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top