KTM 790 Duke Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Can somebody explain the hardware distribution for the passenger pegs and grab rail for me? The dealer tossed me a baggie full, but the owners manual says that only the dealer can install it. Obviously malarkey, but it means there is no guide to what is what.

I have:
-4x long bolts with torque heads only,
-2x long bolts with torque+hex heads
-2x short bolts with torque+hex heads
-2x adhesive foam pads
-2x little black bolts w/ hex heads

So what goes where?
 

·
Registered
2020 Duke 890 R
Joined
·
49 Posts
the attached parts fiche pdfs should help for some of the fasteners

subframe
#9 Collar screw M8x40 ISA40 SS x2 (top passenger peg holes l/r)
#10 HH COLLAR SCREW M8X25 TX40 x2 (bottom passenger peg holes l/r)

tank,seat
#24 AH-COLLAR SCREW M8X50 ISA45 x4 (pillion handlebar holes l/r)
 

Attachments

·
Registered
Joined
·
178 Posts
Is there somewhere online to download the entire parts pdf?
 

·
Registered
Joined
·
178 Posts
There is NO 890 Duke R specific info on his site.
 
1 - 6 of 6 Posts
Top