KTM 790 Duke Forum banner

1 - 13 of 13 Posts

·
Top Speed guru
Joined
·
80 Posts
Discussion Starter · #1 ·
I'm still running the stock mirrors and they actually work fine, but I don't care for the look. was considering the PP bar end mirrors but have a concern. The stock mounting post on the lever clamp sticks up and is downright ugly. Those running bar end mirrors, is there another clamp without the post or do you just run with it sticking up and look ugly?

Thanks for any help you can offer...
 

·
Top Speed guru
Joined
·
80 Posts
Discussion Starter · #3 ·
Thanks. I will try that. Anyone do this in the US? Same P/N? Appreciate the help.
 

·
Super Moderator
Joined
·
1,269 Posts
I got the mirror thread plugs, on eBay. Looks OK an very cheap.



If you would like to take this path, please remember that you need a set with one right and one left thread.
 

Attachments

  • Like
Reactions: J D

·
Registered
Joined
·
38 Posts
Lever perch clamps part no 6411390500030 that’s here in the uk might be different for yourself
Haven't quite worked out why these are a slightly different colour to the originals, not enough to stop me using them but it is noticeable.
 

·
Registered
Joined
·
38 Posts
Haven't quite worked out why these are a slightly different colour to the originals, not enough to stop me using them but it is noticeable.
Good to know. It's still got to be better than the cheesy orange ones on Ebay.
 

·
Registered
Joined
·
439 Posts
Yes. They work fine. I have 2 extras. PM me your address if you want them.
Thanks LLAWD I appreciate the generous offer. I had a list of parts the dealer is ordering for me and I had the clamps on that list. Your post confirmed that they will work. :)
 
1 - 13 of 13 Posts
Top