[QCS]

I have Renthal KTM Low in Duke690 so I had possibility to compare it in 790 and considering my needs I kept 819-50

Wanted something flatter. The Rizoma drag bars seem tempting.

Just got the Woodcraft clip on kit. Unfortunately the bike is at the dealer until further notice due to an immobilizer issue . Will report back once its on. I also have bar end mirrors, so ill report on clearances as well. Will most likely set up clip ons in their highest position as clearance is minimal at full lock with stock bars.

Looking forward to some install pics and impressions.

 

[Adnan Delkic]

any updates pics of the installs of the renthal or woodcraft clipons

 

[bpmckie]

Does anyone have the specs of the 890 duke handlebar? I have read that it is lower than the 790 bar and was curious of the dimensions.

 

[EvansB2]

Does anyone have the specs of the 890 duke handlebar? I have read that it is lower than the 790 bar and was curious of the dimensions.

No dimensions, but there is a photo and description here.

 

[AussieNitro]

I just did the woodcraft clip-ons AMAZING easier turn in, more balanced, I'm more sports bike orientated so found the stock duke bars slightly too wide, too high and wrong wrist angle for me, The woodcraft clip-ons fixed all of that.

 

[AussieNitro]

Ps: woodcrafts cause no problem with bar-end mirror, in up & forward, street position.

 

[MrSlowJon]

Has anyone tried Rizoma Fat Bars - 15mm Height MA011? If so any issues and is clearance on full lock OK? They look like the lowest I can find without going woodcraft, and not too wide.