KTM 790 Duke Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hey guys so I' have a m4 decat link pipe that I'm trying to install. The problem I'm having it the flanges where the slip on and the link pipe meet don't sit flush and has a gap between the flanges. Wondering if I'm doing something wrong or if it's the link pipe it self. Gap is wide where the c clamp can not grasp on to flanges to seal, i have tryed to add the oem gasket but no luck.

Thanks for the help!!
 

Attachments

·
Registered
Joined
·
20 Posts
You definitely need the OEM gasket installed regardless. As for not fitting if you can’t get the clamp on correctly (with gasket) you should send it back or grind down the inside pipe a little so you can tighten up the clamp.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #4 (Edited)
Here’s what the gap should look like with the gasket...

View attachment 5127
Thanks Sk225! I ended up taking your suggestion and grinding off what was needed which was about 10mm of the inside pipe. The flanges now sit flush with the gasket installed. They Should have included in fine print "angle grinder needed for installation" Lol jk.
 

Attachments

1 - 4 of 4 Posts
Top