KTM 790 Duke Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
I am planning to get Cyclops multi function turn signals from a US dealer for my 2019 790 Duke (US Spec bike). Will I be needing any resistors/adapters for the set up or is it plug & play with the stock connectors ? Can any one using the turn signals help me with the set up steps.
 

·
Registered
Joined
·
32 Posts
I have bought a set of the Cyclops turn signals but have yet to install them. From what I read, the 790 Adventure is plug and play with these, not sure if the Duke is different. I am holding off till I get the tail tiddy in so I can do it all at once.
 

·
Registered
Joined
·
141 Posts
Thanks again. I have to go that route. Only issue you said is the indicator light on the panel doesn't work now. If that is all, I can live with that.
 

·
Registered
Joined
·
141 Posts
Thanks, that is useful. I'll check on it. I am not the only one who rides my bike and I don't forget but it could get someone else killed if they don't pay attention.
 
1 - 10 of 10 Posts
Top